Concrete Floor Coating Services for Your Home
Request an estimate today
Concrete wears down. It gets dusty, stained, and cracked. Water soaks in after heavy rain. A coating is a hard layer that covers the slab and protects it. A slab is the flat concrete base of your home.
Arrivedauthority Floor Coating is a referral service. We do not do the work. We explain the basics in short words, then connect you with independent providers in our network. They look at your floor and give you a written estimate. You compare, then decide. There is no obligation, and no pressure.
Concrete floor wearing out? Start here
Dust, flakes, stains, and cracks all mean your slab needs help. A slab is the flat concrete base under your home. A coating is a thin layer that seals it. This page uses short words and explains each trade term once. You do not need any floor experience to follow it.
Signs you should act soon
Look for these problems first:
- Old paint that peels or flakes
- Gray dust on your shoes
- Oil or rust stains that keep coming back
- Cracks you can catch a fingernail in
- Puddles that sit after a storm
Cracks and damp spots come first. A coating over a problem hides it for a while. Then the coating fails.
Test for moisture before you spend money
Our area has hot, humid summers and heavy downpours. Many slabs hold water vapor. Vapor can push a coating right off the floor. Try this quick check. Tape a clear plastic square to the floor for a day. If the underside looks wet or foggy, tell every provider you talk to.
Request a callback to check provider availability in your area.
What concrete coating is
Concrete coating is a liquid that hardens into a tough skin on your slab. Some types are epoxy, which is a two-part resin that bonds hard to concrete. Others are polyaspartic, which cures fast and handles sun well. Each one has trade-offs in price, look, and wear. A provider can explain which fits your floor.
Basement floor coatings
Basements are often the damp room. Many homes here sit on a slab, so you may have a lower level only in some houses. If you do, moisture matters most. A provider may use a vapor-blocking primer first. Ask about drains and sump pumps too, since a coating cannot fix a leak.
Patio and porch coatings
Outdoor slabs face sun, rain, and mud. Slick floors are a risk when wet. Ask for a textured finish, which adds grip. Choose a coating made for sun, since some types turn yellow outside. Your provider can show small sample boards.
Workshop and shop floors
Tools drop. Jacks roll. Oil spills. A workshop floor needs a thick, tough coating. Many providers grind the slab first, then add a thicker layer for hard use. If you park a car in the space, say so. Hot tires can lift weak coatings.
Laundry rooms and other spaces
Laundry rooms see leaks and soap. A sealed floor wipes clean. Mudrooms, sunrooms, and storage rooms also work well. Epoxy garage floors have their own page, so check there for garage details. If you are also planning hardwood flooring installation inside the house, tell the provider. Some handle more than one floor type.
How the work is done
Most jobs follow the same path. The provider moves items out of the way. Then comes grinding, which means a machine scuffs the slab so the coating grips. Cracks get filled. Then the coating goes on in layers. Each layer needs time to cure, which means to harden fully. Ask how long before you can walk on it and drive on it.
Coating vs. sealing
A sealer soaks in and guards the top of the concrete. It is thinner, and it costs less. It works for light use. A coating sits on top, so it adds color and a thicker shield. If your floor has deep stains or heavy wear, a coating usually lasts longer. A provider can show you both.
Custom floor finishes
You can pick more than gray. Providers offer solid colors, color flakes, and speckled blends. Some add a clear topcoat for shine or a matte look. These custom floor finishes change how the room feels. Ask to see a real sample in your own light before you choose.
Heat and humidity matter here
Hot attics warm the walls. Hot slabs can make coatings cure too fast. A good provider plans around the weather. Ask about work in the morning, or about checking the slab temperature. Tropical storm season may also delay a job, so ask how they handle rain.
Living with your coated floor
Care is simple. Sweep often. Mop with mild soap. Wipe spills soon. Do not drag heavy items. Use mats under bikes and tool carts. Most coatings can show scratches over time, and some can be touched up later.
Questions to ask the installer
Start with questions. Here is a short list:
- How will you test for moisture?
- How will you prep the slab?
- What brand and type of coating will you use?
- How many coats will go down?
- What does the written estimate include?
- How long until I can use the room?
- What is the warranty, in writing?
Compare, then decide
Get more than one estimate. Lay them side by side. Check that each one lists prep, materials, and cure time. A lower price may leave out grinding or crack repair. Take your time, since there is no obligation to say yes.
Request a callback to talk through your floor and your options.
What's Included
Floor Check and Prep
The provider looks at cracks, stains, and moisture, then grinds the slab so the coating bonds well.
Crack and Pit Repair
Small cracks and pits get filled and smoothed before any coating goes down, so the surface looks even.
Coating Layers Applied
The provider applies primer, color, and a clear topcoat in layers, with time to cure between each one.
Finish and Walkthrough
You review the floor, learn how long to wait before use, and get care tips for cleaning.
What Concrete Coating Typically Costs
Prices vary by size, slab condition, and coating type. These are typical U.S. ranges only. Your price may be higher or lower. Always ask each provider for a written quote that lists prep, materials, and cure time.
| Item | Typical range | Notes |
|---|---|---|
| Clear concrete sealer | $1 – $4 per sq ft | Thin protection for light use |
| Basic one-coat coating | $3 – $6 per sq ft | Solid color, limited wear resistance |
| Epoxy with color flakes | $5 – $10 per sq ft | Thicker, with texture and a custom look |
| Polyaspartic topcoat | $7 – $12 per sq ft | Fast curing and good for sun exposure |
| Grinding and slab prep | $1 – $3 per sq ft | Often included, but ask to confirm |
| Crack and pit repair | $150 – $800 per job | Depends on how many cracks there are |
How It Works
Tell Us About It
Share your floor size, its problems, and the room. Use the request form, or request a callback to check provider availability.
Get Matched
A provider in our network contacts you to talk details and set a visit.
Compare Estimates
Review written quotes side by side. Check prep, coating type, and cure time.
Choose and Schedule
Pick the provider you like and set a date that works for you.
Why Call Arrivedauthority Floor Coating
Plain Answers First
We explain terms in short words so you can ask smart questions before anyone visits.
Local Providers
Providers in our network work with local heat, humidity, and slab types every season.
Easy Comparison
Request more than one estimate and compare prep, materials, and timing side by side.
No Pressure
There is no obligation. You can ask questions, think it over, and decide on your schedule.
Other Services
Need concrete floor coating services in Houston?
Have a garage or concrete floor project? Request a callback to check provider availability, or send a request and compare estimates at your own pace.
No obligationConcrete Floor Coating Services FAQ
How long does a concrete floor coating last?
It depends on prep, coating type, and use. Many coatings last several years in homes, and longer with light use. Moisture and poor prep are the most common reasons a coating fails early.
Can you coat old, cracked concrete?
Often, yes. A provider fills small cracks and grinds the surface first. Deep cracks or moving slabs need a closer look, and they may need a repair before any coating goes on.
Is a sealer or a coating better for my floor?
A sealer is thinner and costs less, so it suits light use. A coating is thicker and adds color and wear resistance. A local provider can show you samples and explain the difference.
Reach a local provider
Have a garage or concrete floor project? Request a callback to check provider availability, or send a request and compare estimates at your own pace.
No obligation